Beginner's Guide on How to Use a Table Saw
Posted by Katy | Toolstop on 14th Jan 2021
Changing an SDS Chuck Mechanism can be daunting if you have never done so before. That is why we have created this handy Toolstop guide. If you want to know how to change a drill chuck, to be precise how to change the chuck on an sds drill, follow the given steps to be able to do so with ease.
How to Use a Table Saw
This is the ultimate Toolstop guide for beginners on how to use a table saw. Whether you are thinking of buying one, or already have but aren’t 100% sure on how to work it, this is the guide for you. If you are swaying between whether or not you really need a table saw, you can check out our blog post on why you should own a table saw.
Table saws are a great piece of kit. To quickly recap, they:
- Can perform crosscut, rip, mitre, and bevel cuts
- Are stationary
- You can see the cut as you make it
- Can be mounted on your workbench
Parts of the Table Saw
First off, let’s take a look at a standard table saw model so you can familiarise yourself with the parts. We have listed some of the most important parts below and explained what their purpose is.
Rip Fence: The rip fence is essentially a cutting guide when the table saw is in use. Its main job is to protect you. It will typically extend to the full length of the table saw, allowing you to cut bigger pieces of material, and is usually mounted to the right side of the blade.
Blade Guard: An important safety feature that prevents wood falling onto the spinning blade whilst providing some finger protection.
Riving knife: Extremely important part of a table saw which prevents kickback. It travels up and down with the blade when the height is adjusted.
Mitre Gauge: Allows you to make mitre cuts and other cuts at various angles.
Blade Angle & Height Adjustment: Allows you to fully customise the blade to your desired cutting height and angle (of course within the specification of the model you have). It’s typically found in the form of a ‘wheel’ that you can turn and move to adjust the height of the blade for thicker work pieces, or the angle of the blade for bevel cuts.
Now that we know all the main parts of a table saw, let us tell you how to work them.
How to adjust the blade height on a table saw
The most essential step is knowing how to adjust the height of the blade. What use is a table saw if you can't get it to the height and angle you need it to be at? Luckily, this step is easy, and we kind of touched on it above. Always start off by unplugging/switching off your saw - safety is a key priority when working with sharp, spinning blades. Then it’s as simple as spinning the wheel at the front in the direction you want the blade to go (usually anti clockwise to lower, clockwise to raise). You can use a combination square to make sure the blade is at the exact height you want it to be at for the desired size cut, though we suggest you only ever want the blade height to be about a tooth size above the cutting material. This will ensure the cleanest, safest cut.
How to change the blade on a table saw
Our Toolstop video guide shows you exactly how to change the blade on the Dewalt DW745 (now superseded by the DWE7485). However, most other table saws work in the exact same/similar ways.
Simply remove the table insert, adjust the height of the blade (as discussed above) to its highest point so that the nut is visible and then all that's left to do is use the spanner/wrench that came with your table saw to unscrew the nut. The blade should easily slide out.
Just do these steps in reverse to reinsert a saw blade.
How to make a mitre cut with a table saw
Making a mitre cut with table saw is relatively simple. You can watch our quick video from Eric at Bosch which will show you exactly how to use a table saw to cut angles in a few simple steps.
A mitre cut is used when you want to join two piece of wood together, so the cut is typically made at an angle, say 45° in this instance.
To make a mitre cut with a table saw, all you have to do is set the mitre guide/gauge to the angle you want to cut at (45°) and adjust your blade height. Our video shows this step by step so you can see exactly how to adjust the guide and perform the cut.
Always move the wood slowly and gently towards the blade and push it through until the cut is complete. If you are making a narrow cut, you may want to use push sticks to stop your hands getting too close to the blade.
How to make a rip cut with a table saw
Table saws don't just make mitre cuts, they can also do rip cuts. We have another video on our YouTube channel which shows you how to make a rip cut with a table saw.
You should now be able to operate your table saw easily and safely if you have followed the above steps. Remember to always take care when working with power tools and If you find yourself needing any more assistance, we will be happy to help.